AWAH Z2R Drill Powered Pulley

The Z2R is an innovative multi-functional device which combines the features of an electrically assisted pulley, progress capture pulley, and lowering device into one compact and light-weight unit.

A powerful, NON-impact drill is needed to operate the Z2R as powered pulley. The drill requires at least 50 Nm, however AWAH suggests 120 Nm for optimal operation. Brushless drills are required as they don’t build up heat as quickly. Additionally the drill’s battery has an effect on it’s performance, therefore batteries with more cells are better. AWAH states that a 5.0Ah battery is just enough, but an 8.0Ah battery is ideal. We strongly suggest to use a high quality brand drill with min. 18V battery for frequent use and/or long ascending distances under high load. We’ve used the Makita XPH14Z 18V LXT successfully for long and high load operation 😉

NOTE: Z2R is designed to lift heavy objects, and its lowering function is purely for convenience. Due to the one-way locking function of the ratchet, the release is not progressive, but sudden (the reverse lock is disengaged with a sudden jerk on the lever). Lowering the load then requires the assistance of additional friction from the side arms of the device to manage the speed of descent. It is NOT a self camming device like a Gri-Gri, and therefore a brake hand must always handle the free rope end, and descend speed. The Z2R pulley is either engaged or completely free (a bit comparable to the Wild Country Revo).

The Z2R carries the CE-Mark! It is in conformity with the provisions of Machinery Directive 2006/42/EC, and General Product Safety Regulation (EU) 2023/988 of the European Parliament. It is NOT certified to any EN/ANSI standard, therefore it is NOT PPE rated, and may not be used for transport of persons!
The Z2R must always be used with a reliable backup system on an independent rope whenever heavy goods are lifted because the rope is held inside the device merely by friction around the pulley sheave!

The Z2R is designed to work with rope diameters ranging from 9-11mm. It works best with very stiff and static ropes. Normal EN 1891 ropes do not typically work well, because the ropes are too flexible, whereas EN 1891A ropes work just fine. The maximum allowed load for the Z2R is 200 kg.

The input shaft features an 8mm hexagonal bit pickup (two HEX bits are included). The length of the bit should be such that the electric drill and Z2 are as close as possible without making contact. If the bit is too long it may cause the device to shake when powered under load, and if too short the drill-chuck will rub against the aluminum case.
During AWAH’s tests, the Z2R ran for 100,000 meters with a safe margin, however this was not performed under load. The nominal lifespan of the Z2R input shaft gear is 20,000 meters. This wear part, the Input Shaft Drive Gear, costs only 18€ and can easily be replaced by the user in a matter of a few minutes. The gear ratio is 100:12 (output teeth to input teeth), which translates to about 8:1 (8.3 revolutions on input shaft = 1 revolution on rope pulley). One spare Input Shaft Drive Gear is included with the Z2R!
If the HEX-bit pickup ever gets damaged it too can be replaced by the user within minutes. For this we offer the Input Assembly Repair Kit.

See full technical specs in the corresponding tab below.
DOWNLOAD the manuals and Doc in the download tab below.

Note: due to distributor territory regulations we DO NOT ship the Z2R to USA and CA!
Due to the geolocation of your current internet access the “Add to cart” button below might not be visible for you. If you order from USA or CA and wish to ship to any other country, please contact us for assistance.
For shipments to USA or CA please order from our US partner HowNOT2:
> click here to be forwarded to the HN2 shop page

LineGrip Corp. is official and exclusive AWAH distributor and importer for the European Union since March 1st. 2024.
The global MSRP for the Z2R is $1499, and we determined the EU price to be slightly below that.
Dealers please contact us here for wholesale prices (trade license compulsory, MOQ 4 units).

In the box: Z2R pulley device, plastic water proof Tough-Case w. pro-foam-padding, 2x HEX-Bit, 1x spare input drive shaft, oil can (empty).

If you can’t see the “Add to Cart” button below it’s due to your internet access provider’s location. Geolocation currently blocks all countries that are exempt from purchasing the Z2R from us (from EU).